# How are the ERA5 single level datasets computed?

**URL:** <https://forum.ecmwf.int/t/how-are-the-era5-single-level-datasets-computed/2190>\
**Category:** Datasets and Usage\
**Tags:** eac4, global\_reanalysis, era5\
**Created:** [14 March 2024 13:21 UTC](https://forum.ecmwf.int/t/how-are-the-era5-single-level-datasets-computed/2190 "2024-03-14T13:21:37Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Sebastian\_Schunke](https://forum.ecmwf.int/letter_avatar_proxy/v4/letter/s/a587f6/32.png) [@Sebastian\_Schunke](https://forum.ecmwf.int/u/Sebastian_Schunke)\
**Post date:** [14 March 2024 13:21 UTC](https://forum.ecmwf.int/t/how-are-the-era5-single-level-datasets-computed/2190/1 "2024-03-14T13:21:37Z")

</div>

I have been comparing the ERA5 single level datasets and EAC4 multilevel data and I am confused.

If I use the EAC4 data to compute the total column concentrations for ozone, for example, I get a different value than I receive from the ERA5 single level dataset.

To be more precise, I use the mass ratio data from EAC4 and the surface pressure value for my location. Then I compute the pressure profile using the PSAB method with the 60 level specification. Using this pressure profile I compute the total column concentration of ozone.

I do notice, that my way of computing the total column concentration becomes consistent with the single level data from ERA5, if I assume 1013 hPa surface pressure and ignore the actual value.

So, finally, to come back to my question:  
What is the relationship between the ERA5 single level data (total column ozone) and EAC4 multi level data? Which of these two values is computed from the other? Am I right in suspecting, that the default L60 level definitions, with 1013 hPa surface pressure, are used to compute the ERA5 single level value from the EAC4 multi level data?

---

<div class="post-metadata">

**Author:** ![Sebastian\_Schunke](https://forum.ecmwf.int/letter_avatar_proxy/v4/letter/s/a587f6/32.png) [@Sebastian\_Schunke](https://forum.ecmwf.int/u/Sebastian_Schunke)\
**Post date:** [14 March 2024 14:32 UTC](https://forum.ecmwf.int/t/how-are-the-era5-single-level-datasets-computed/2190/2 "2024-03-14T14:32:28Z")

</div>

Ah, I just had another thought: Is it possible, that the single level data is computed using the Mean sea level pressure, instead of the surface pressure?

---

<div class="post-metadata">

**Author:** ![Michela](https://forum.ecmwf.int/letter_avatar_proxy/v4/letter/m/898d66/32.png) [@Michela](https://forum.ecmwf.int/u/Michela)\
**Post date:** [15 March 2024 09:59 UTC](https://forum.ecmwf.int/t/how-are-the-era5-single-level-datasets-computed/2190/3 "2024-03-15T09:59:18Z")

</div>

Hi,  
the two datasets are produced independently. Here a table with some info:

| | EAC4 | | ERA5 |
| --- | --- | --- | --- |
| Exp ID | exp=eac4, class=mc | Period covered | 1940 - present |
| Period covered | 2003 - present (though only 2003 - Dec 2022) | Production Period | Jan 2016 – end 2017, then continued in near real-time |
| Production Period | Jan 2017 _– Dec 2018,_ then continued in near real-time | Model version | IFS Cycle 41r2 |
| Assimilation system | IFS Cycle 42r1 4D-Var | Assimilation system | IFS Cycle 41r2 4D-Var |
| Spatial resolution | 80 km globally (T255), 60 levels to 0.1 hPa | Spatial resolution | 31 km globally, 62km for the Ensemble of Data Assimilations (EDA), 137 levels to 0.01 hPa |
| Output frequency (temporal resolution) | 3-hourly analysis fields,3-hourly forecast fields from 0 UTC up to 48 hours,1-hourly surface forecast fields from 0 UTZ up to 48 hours | Output frequency (temporal resolution) | Hourly analysis fields, 3-hourly for the Ensemble of Data Assimilations (EDA), Hourly forecast fields, 3-hourly for the Ensemble of Data Assimilations (EDA), up to 18 hours, with reduced frequency up to 10 days (not in initial release) |
| Anthropogenic missions | MACCity (trend: ACCMIP + RCP8.5) & CO emission upgrade [Stein et al. (2014)](https://www.atmos-chem-phys.net/14/9295/2014/) | Uncertainty estimates | From a 10-member Ensemble of Data Assimilations (EDA) at 63 km resolution |
| Biomass burning emissions | GFAS v 1.2 | Model input | Appropriate for climate (e.g. CMIP5 greenhouse gases, volcanic eruptions, SST and sea-ice cover) |
| Biogenic emissions | Monthly mean VOC emissions calculated by the MEGAN model using MERRA reanalysed meteorology ([Sindelarova et al., 2014](https://www.atmos-chem-phys.net/14/9317/2014/acp-14-9317-2014.pdf)) for the whole period. | Input observations | In addition, various newly reprocessed datasets and recent instruments that could not be ingested in ERA-Interim |
| Chemistry modules | IFS CB05 ([Flemming et al. 2015](https://www.geosci-model-dev.net/8/975/2015/), with updates as given in [CAMS: Reanalysis data documentation](https://confluence.ecmwf.int/display/CKB/CAMS%3A+Reanalysis+data+documentation)) & Cariolle ozone parametrisation in stratosphere | Variational bias scheme | Also ozone, aircraft and surface pressure data |
| Aerosol modules | See [CAMS: Reanalysis data documentation](https://confluence.ecmwf.int/display/CKB/CAMS%3A+Reanalysis+data+documentation) | Satellite data | RTTOV-11, all-sky for various components |
| Input meteorological observations | As in ERA5 (2003-_2016?_), OPS for later years | New parameters | ERA5 contains over 240 parameters on surface and single level alone, plus parameters on other level types. For specific parameters please compare the technical documentation linked below. |
| Input atmospheric composition observations | See [CAMS reanalysis data documentation](https://confluence.ecmwf.int/display/CKB/ERA5%3A+data+documentation) | Parameters removed | A few parameters present in ERA-Interim are not available in ERA5. For availability of specific parameters please see the technical documentation linked below. |
| Aerosol used in radiation scheme | Interactive active aerosols, i.e. aerosol fields from eac4 used in radiation scheme | Handling of accumulated parameters | Accumulated from previous post-processing |
| Ozone used in radiation scheme | Interactive ozone, i.e. ozone field from eac4 used in radiation scheme | Product main page | [Climate reanalysis | Copernicus](http://climate.copernicus.eu/climate-reanalysis) |
| Parameters | Full chemistry output archived as type=an every 3 hours (see parameter lists on [CAMS: Reanalysis data documentation](https://confluence.ecmwf.int/display/CKB/CAMS%3A+Reanalysis+data+documentation)) | Technical documentation | [ERA5 data documentation](https://confluence.ecmwf.int/display/CKB/ERA5%3A+data+documentation) |
| Stratospheric chemistry | No, but Cariolle ozone parametrisation in stratosphere and stratospheric O3 available. | Additional innovations | Long-term evolution of CO2 in RTTOV, cell-pressure correction SSU, improved bias correction for radiosondes, EDA perturbations for sea-ice cover |
| Product main page | [CAMS: Reanalysis data documentation](https://confluence.ecmwf.int/display/CKB/CAMS%3A+Reanalysis+data+documentation) | | |
| Technical documentation | [CAMS: Reanalysis data documentation](https://confluence.ecmwf.int/display/CKB/CAMS%3A+Reanalysis+data+documentation) | | |
